Universal Tray Connector Bolt

Part Number

Provides both a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-10 required per connection.

Universal Inline Connector Bolt

Part Number

Provides a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-12 required per connection.

201 to 501 Series Connection Adapter

Part Number Part Size
CM 201/501T 5 ¼" x 5 ¼"

Used to adapt 201 series to 501 series trays.

Universal 201/501 Series Intersection

Part Number Part Size
CM 0303T 5 ½" x 5 ½"

Installed as "T" component for the Snake 201 and 501 series trays.

Cable Drop-Out Waterfall

Part Number Part Size
TO-2 2"
TO-3 3"
TO-425 4 ¼"
TO-5 5"
TO-6 6"

Provides a smooth transition for cables when exiting the tray. Maintains a consistent 4" radius eliminating kinked cables. Easily attaches to tray with cable ties.

I-Beam Clamp

Part Number Part Size
CM 501-IBW

Bracket for 501 Series Tray to I-Beam.

Threaded Rod

Part Number Part Size
TR-1 3/8" x 12" Threaded Rod
TR-2 3/8" x 24" Threaded Rod
TR-3 3/8" x 36" Threaded Rod
TR-4 3/8" x 48" Threaded Rod
TR-6 3/8" x 72" Threaded Rod
TR-8 3/8" x 96" Threaded Rod

Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8"-16 10/24 high strength steel as per ASTM A36 and available in 1', 2', 3', 4' 6', and 8' lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8" hex nuts and one flat washer. No additional mounting accessories are necessary.

Concrete Wedge Anchor

• Anchor diameter equals hole diameter
• Comes complete with nuts and washers ready for use
• Collar expander offers 360° contact with masonry
• Projections on collar immediately grip concrete

Part Number


Concrete Anchor

Part Number
CM CA-38

Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. Anchors 101 and 407 series of any applications with a 1/4" hole.

Hanger Bracket for Threaded Rod Suspension

Part Number
CM TR-HBS for Steel
CM TR-HBC for Concrete

Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm power actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.