501 Series Wall Mount Cable Tray Accessories
Universal Tray Connector Bolt
| Part Number |
|---|
| CB-10 |
Provides both a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-10 required per connection.
Universal Inline Connector Bolt
| Part Number |
|---|
| CB-12 |
Provides a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-12 required per connection.
201 to 501 Series Connection Adapter
| Part Number | Part Size |
|---|---|
| CM 201/501T | 5 ¼" x 5 ¼" |
Used to adapt 201 series to 501 series trays.
Universal 201/501 Series Intersection
| Part Number | Part Size |
|---|---|
| CM 0303T | 5 ½" x 5 ½" |
Installed as "T" component for the Snake 201 and 501 series trays.
Cable Drop-Out Waterfall
| Part Number | Part Size |
|---|---|
| TO-2 | 2" |
| TO-3 | 3" |
| TO-425 | 4 ¼" |
| TO-5 | 5" |
| TO-6 | 6" |
Provides a smooth transition for cables when exiting the tray. Maintains a consistent 4" radius eliminating kinked cables. Easily attaches to tray with cable ties.
I-Beam Clamp
| Part Number | Part Size |
|---|---|
| CM 501-IBW |
Bracket for 501 Series Tray to I-Beam.
Concrete Wedge Anchor
• Anchor diameter equals hole diameter
• Comes complete with nuts and washers ready for use
• Collar expander offers 360° contact with masonry
• Projections on collar immediately grip concrete
| Part Number |
|---|
| CM WA-XX |
XX DENOTES SIZE
Concrete Anchor
| Part Number |
|---|
| CM CA-38 |
Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. Anchors 101 and 407 series of any applications with a 1/4" hole.
Concrete Anchor for 501 Series Wall Snake
Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Special design prevents the anchors from spinning in the hole. Anchor won’t drop out while setting overhead.
| Part Number |
|---|
| CM 501-CA |
Reprinted from information and permission received from the Hilti company
