Hideaway Floor Enclosure

Features:
• This trim less, flush floor box provides a practical and non-intrusive solution for easy access to cables
• Unique lift-off section of the cover allows full access to cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit
• Sturdy steel cover is installed flush with the floor. The edging is less than 1/4″ wide and allows for multiple surfaces to be integrated within the cover. When the box is not in use, only the elegant, hand-mitered edge is visible

Part Number
708-442-11792

Snake Bus Recessed Floor Box with 3 Independent Protected Circuits

Features:
• Designed to customer requirements with up to 3 independent circuits and 12 keystone receptacles for data
• Designed to work in conjunction with 707 Series Snake Bus Power  Distribution
• Two separate compartments for data and power
• Steel cover with 2-cable access points and recessed lid will accept carpet

Part Number Part Size
CM 707-20-A-25-04-20-3-005-0018 13" L x 9" W x 5 ½" D

SNAKE TRAY CAN CUSTOM CONFIGURE YOUR MODULES TO FIT OUR SPECIFIC REQUIREMENTS

Circular Data & Power Reception Module for Access Floors

Snake Tray’s new all metal circular floor box for access floors offers a durable data and power reception module for workstations. Its optional integrated circuit breaker eliminates nuisance power interruptions to the rest of the office. Models are available with standard or custom configurations to meet the customer’s specifications. Available in powder coated or anodized finishes to coordinate with any architectural design.

Features:
• All metal design gives this floor box durability to last a life time
• Circular design allows for the module to be installed in the same size opening as standard air diffusers
• Two compartment all metal construction for both power and/or data connections
• Standard and custom electrical and data configurations available
• Optional current overload protection
• Available in powder coated or anodized finishes to coordinate with the architectural design of the building
• Made in the USA and 100% compliant with the Buy America Act

 

Part Number Part Size
CM 708-78-11568 10" OD x 5" D

Zone Distribution Box II Under Floor use for Fiber & Copper

Applications: Fully assembled large capacity, secure enclosure that works within the confines of office raised floor tiles. Will accommodate up to 6 RU of standard 19″ rack mountable field terminated or pre-terminated connectivity solutions.

Features:
• Unique angled support allows for 2 more RU spaces with the same volume and footprint
• Built-in internal cable manager
• Secure locking hinged cover that allows for unimpeded working space
• Constructed from 16 GA galvanized steel powder coat finish available
• Available with standard knockouts or customer specified locations
• Accepts a variety of connectivity solutions

Part Number Part Size
CM 708-78-10720-2.50 22" L x 15 ½" W x 8 ½" D

Low Profile Data Module with Custom Patch Panel

Applications: Fully assembled low profile, secure enclosure that works within the confines of office raised floor tiles. Includes a variety of customer dictated working options that will accommodate up to 4 RU of standard 19″ rack mountable field terminated or pre-terminated connectivity solutions.

Features:
• Built-in internal cable manager
• Secure locking hinged cover that allows for unimpeded work space
• Constructed from 16 GA galvanized steel with customer specified powder coat finish available
• Available with standard knockouts or  customer specified locations
• Accepts a variety of connectivity solutions
• Multiple 2 and 4 RU custom connectivity mounting plates are available

Part Number Part Size
CM 708-SK-0216 16" L x 15 ½" W x 4 ¾" D

Zone Distribution Box Empty – Base Box

Applications: Under-floor zone cabling consolidation enclosure. The in-floor enclosure saves valuable real estate by providing a secure solution under the floor which relieves congestion on racks and cabinets for installing network equipment.

Features:
• Lockable secure lid design
• Multiple knockout configurations available, edge protected cable access points
• Constructed from 16 GA galvanized steel with customer specified powder coat finish available
• Custom configurations are available

Part Number Part Size
CM708-1100-05-03 21" L x 21" W x 8" D

Ultra Low Profile Data Distribution Box

Applications: The Ultra Thin floor box designed for extremely low profile floors. 1 RU of standard 19″ passive rack mountable space and horizontal cable slack managers. Lockable secure door.

Features:
• Ultra slim design only occupies 2 ¾” of height in an access floor
• Removable locking solid cover
• Device brackets are movable to accommodate different size components
• Eight (8) 1.28” x 3.19” openings, 4 per side, for easy cable entry
• Built in strain relief points for Velcro straps
• Dimpled floor stand offs
• Standard Black Powder Coat, other colors are available upon request

Part Number Part Size
CM708-05-0024 21" L x 21" W x 2 ½” D

Zone Distribution Box – High Density Fiber

Applications: The in-floor Fiber Cassette enclosure is an ideal zone cabling solution serving as a consolidation point or zone distribution area. The in-floor enclosure saves valuable real estate by providing a secure solution under the floor which relieves congestion on racks and cabinets for installing network equipment. The enclosure can be used along with up to 14 pre-terminated fiber cassettes as a ZDA for instant data center installations and reconfigurations. The innovative lift-out tray design allows for easy cable configurations, minimizes cable pinching and will maintain proper bend radius for cable.

Features:
• Lockable secure lid design
• Fold out platform allows for accessibility to 14 fiber cassettes
• Multiple knockout configurations available, edge protected cable access points
• 14 MPO – Input/output 84 channels of SC Duplexes
• Simplified design reduces network downtime and labor costs associated with MAC work
• Constructed from 16 GA galvanized steel with customer specified powder coat  finish available
• Multiple sizes available

Part Number Part Size
CM 708-1100-05-01 21" L x 21" W x 8" D

Under Floor Data Distribution System

Features:
• Designed to a customer’s specific requirements to accommodate the need for specialized fire code requirements
• Designed to be used with Series 652 Snake Way Secured Pathway
• 8 RU of 19″ rack mountable space
• Removable locking cover
• Constructed from 16 GA galvanized steel with customer specified powder coat finish available
• Custom knockout configurations

Part Number Part Size
CM 708-SK-0189 20" L x 20" W x 13 ½" D