201 SERIES SNAKE TRAY HAND BENDABLE CABLE TRAY FOR OVERHEAD, WALLS, AND UNDERFLOORS

Universal Tray Connector Bolt

Provides both a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-10 required per connection.

Universal Inline Connector Bolt

Provides a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-12 required per connection.

201 to 501 Series Connection Adapter

Used to adapt 201 series to 501 series trays.

Universal 201/501 Series Intersection

Installed as "T" component for the Snake 201 and 501 series trays.

Cable Drop-Out Waterfall

Provides a smooth transition for cables when exiting the tray. Maintains a consistent 4" radius eliminating kinked cables. Easily attaches to tray with cable ties.

Beam Clamp for 3/8″ Threaded Rod

Pedestal Mount Bracket for 201 Series

Used to attach single pocket 201 series Snake Tray to the floor pedestals utilized in the construction of raised access floors.

Cabinet Mount Bracket for 201 Series Single

Used to attach single pocket 201 series Snake Tray to the tops of equipment cabinets. Clamp to attach to tray included.

Cabinet Mount Bracket for 201 Series Double

Used to mount double pocket 201 series Double Snake to the tops of equipment cabinets. Clamp to attach to tray included.

Rack Mount Bracket for 201 Series

Used to mount single pocket 201 series Snake Tray to the tops of standard equipment racks via a built-in clamping feature. No additional hardware required. RBN-201-90 mounts to the tray perpendicularly. Clamp to attach to tray included.

Seismic Bracing Kits with Crimp Tool & Cutter

Threaded Rod

Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8"-16 10/24 high strength steel as per ASTM A36 and available in 1', 2', 3', 4' 6', and 8' lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8" hex nuts and one flat washer. No additional mounting accessories are necessary.

Concrete Wedge Anchor

• Anchor diameter equals hole diameter
• Comes complete with nuts and washers ready for use
• Collar expander offers 360° contact with masonry
• Projections on collar immediately grip concrete

XX DENOTES SIZE

Concrete Anchor

Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. Anchors 101 and 407 series of any applications with a 1/4" hole.

Hanger Bracket for Threaded Rod Suspension

Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm power actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.

Attachment Hardware

Snake Nut™ Threaded Rod Fastener

This innovative fastener eliminates the labor intensive need to hand thread hex nuts up a threaded rod. Simply insert the Snake Nut anywhere on the threaded rod and tighten into place with a set screw. Once locked into place, Snake Nut has been tested to hold up to 6,800 pounds.