Universal Tray Connector Bolt

Part Number
CB-10

Provides both a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-10 required per connection.

Universal Inline Connector Bolt

Part Number
CB-12

Provides a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-12 required per connection.

Universal 201 Series Intersection

Part Number Part Size
CM 0303H 5 ½" x 5 ½"

Installed as 4-way crossing intersection component for the 201 Snake Tray Series.

Beam Clamp for 3/8″ Threaded Rod

Part Number
BC-201-A

Pedestal Mount Bracket for 201 Series

Part Number
ST-201

Used to attach single pocket 201 series Snake Tray to the floor pedestals utilized in the construction of raised access floors.

Seismic Bracing Kits with Crimp Tool & Cutter

Part Number Part Size
CM201/801-SBK1-XX Kit for Anchoring Snake Tray and Mega Snake in Concrete Ceilings
CM 201/801-SBK-J-XX Kit for Anchoring Snake Tray and Mega Snake around Joists
CM 201/801-SBK-L-XX Kit for Anchoring Snake Tray and Mega Snake with Lag Bolts into Wood Beams
CM 201/801-SB-CT Crimp Tool
CM 201/801-SB-CU Cutter

Threaded Rod

Part Number Part Size
TR-1 3/8" x 12" Threaded Rod
TR-2 3/8" x 24" Threaded Rod
TR-3 3/8" x 36" Threaded Rod
TR-4 3/8" x 48" Threaded Rod
TR-6 3/8" x 72" Threaded Rod
TR-8 3/8" x 96" Threaded Rod

Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8"-16 10/24 high strength steel as per ASTM A36 and available in 1', 2', 3', 4' 6', and 8' lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8" hex nuts and one flat washer. No additional mounting accessories are necessary.

Concrete Wedge Anchor

• Anchor diameter equals hole diameter
• Comes complete with nuts and washers ready for use
• Collar expander offers 360° contact with masonry
• Projections on collar immediately grip concrete

Part Number
CM WA-XX

XX DENOTES SIZE

Concrete Anchor

Part Number
CM CA-38

Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. Anchors 101 and 407 series of any applications with a 1/4" hole.

Hanger Bracket for Threaded Rod Suspension

Part Number
CM TR-HBS for Steel
CM TR-HBC for Concrete

Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm power actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.

Attachment Hardware

Part Number Part Size
CM FW-38 Zinc Plated 3/8" Washer
CM HN-38 Zinc Plated 3/8" Hex Nut
CM RC-38 Zinc Plated 3/8" Rod Coupling