Home »  Snake Tray® » Snake Tray Hardware

Snake Tray Hardware


Threaded Rod

 
Part Number Description
TR-1 3/8" x 12" Threaded Rod
TR-2 3/8" x 24" Threaded Rod
TR-3 3/8" x 36" Threaded Rod
TR-4 3/8" x 48" Threaded Rod
TR-6 3/8" x 72" Threaded Rod
TR-8 3/8" x 96" Threaded Rod
 
Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8" 10/24 high strength steel as per ASTM A36 and available in 1', 2', 3', 4' 6', and 8' lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8" hex nuts and one flat washer. No additional mounting accessories are necessary.
   

 back to top
 

Concrete Anchor for 501 Series Wall Snake™

 
Part Number
CM 501-CA
Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Special design prevents the anchors from spinning in the hole. Anchor won't drop out while setting overhead.
Reprinted from information and permission received from the Hilti company
 
   

 back to top
 

Concrete Anchor

 
Part Number
CM CA-38
Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead.
Reprinted from information and permission received from the Hilti company
 
   

 back to top
 
View Product Video on

Snake Nuts™ Threaded Rod Fastener

 
Part Number Description
CM 801-SN-38-A Fits 3/8"-16 Threaded Rod
CM 801-SN-12-A Fits ½"-13 Threaded Rod
CM 801-SN-58-A Fits 5/8"-11 Threaded Rod
 
This innovative fastener eliminates the labor intensive need to hand thread hex nuts up a threaded rod. Simply insert the Snake Nut anywhere on the threaded rod and tighten into place with a set screw. Once locked into place, Snake Nut has been tested to hold up to 9000 pounds.
   

 back to top
 

Hanger Bracket for Threaded Rod Suspension

Part Number
CM TR-HBS For Steel
CM TR-HBC For Concrete
Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm powder actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.
Reprinted from information and permission received from the Hilti company
   

 back to top
 

Attachment Hardware

 
Part Number Description
CM FW-38 Zinc Plated 3/8" Washer
CM HN-38 Zinc Plated 3/8" Hex Nut
CM RC-38 Zinc Plated 3/8" Rod Coupling
 
   

 back to top