Seismic Bracing Kits with Crimp Tool & Cutter

Part Number Part Size
CM201/801-SBK1-XX Kit for Anchoring Snake Tray and Mega Snake in Concrete Ceilings
CM 201/801-SBK-J-XX Kit for Anchoring Snake Tray and Mega Snake around Joists
CM 201/801-SBK-L-XX Kit for Anchoring Snake Tray and Mega Snake with Lag Bolts into Wood Beams
CM 201/801-SB-CT Crimp Tool
CM 201/801-SB-CU Cutter

Threaded Rod

Part Number Part Size
TR-1 3/8" x 12" Threaded Rod
TR-2 3/8" x 24" Threaded Rod
TR-3 3/8" x 36" Threaded Rod
TR-4 3/8" x 48" Threaded Rod
TR-6 3/8" x 72" Threaded Rod
TR-8 3/8" x 96" Threaded Rod

Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8"-16 10/24 high strength steel as per ASTM A36 and available in 1', 2', 3', 4' 6', and 8' lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8" hex nuts and one flat washer. No additional mounting accessories are necessary.

Concrete Wedge Anchor

• Anchor diameter equals hole diameter
• Comes complete with nuts and washers ready for use
• Collar expander offers 360° contact with masonry
• Projections on collar immediately grip concrete

Part Number
CM WA-XX

XX DENOTES SIZE

Hanger Bracket for Threaded Rod Suspension

Part Number
CM TR-HBS for Steel
CM TR-HBC for Concrete

Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm power actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.

Attachment Hardware

Part Number Part Size
CM FW-38 Zinc Plated 3/8" Washer
CM HN-38 Zinc Plated 3/8" Hex Nut
CM RC-38 Zinc Plated 3/8" Rod Coupling

Size Adapters

Part Number Part Size
CM 801-2-R6 2" x 12" to 2" x 18" or 2" x 12" to 2" x 24"
CM 801-2-R12 2" x 12" to 2" x 24"
CM 801-4-R6 4" x 12" to 4" x 18" or 4" x 18" to 4" x 24"
CM 801-4-R12 4" x 12" to 4" x 24"
CM 801-6-R6 6" x 12" to 6" x 18" or 6" x 18" to 6" x 24"
CM 801-6-R12 6" x 12" to 6" x 24"
CM 801-2/4-R 2" x 12" to 4" x 18" or 2" x 18" to 4" x 24"
CM 801-2/4-R12 2" x 12" to 4" x 24"
CM 801-4/6-R6 4" x 12" to 6" x 18" or 4" x 18" to 6" x 24"
CM 801-4/6-R12 4" x 12" to 6" x 24"
CM 801-2/6-R6 2" x 12" to 6" x 18" or 2" x 18" to 6" x 24"
CM 801-2/6-R12 2" x 12" to 6" x 24"

Transition from one size Mega Snake to another.

Hinged Splice Plates

Part Number Part Size
CM 801-2-H-SP 2" D Hinged Splice Plate Kit
CM 801-4-H-SP 4" D Hinged Splice Plate Kit
CM 801-6-H-SP 6" D Hinged Splice Plate Kit

Each vertical directional change requires one kit.

Splice Kit

Part Number Part Size
CM 801-SP Mega Snake Splice Kit (2 splice plates per kit)

Splice kit maintains a continuous electrical and mechanical bond throughout the Mega Snake system.

Divider Grid

Part Number Part Size
CM 801-2-DG 2" D Divider Grid x 60"
CM 801-4-DG 4" D Divider Grid x 60"
CM 801-6-DG 6" D Divider Grid x 60"

Divides cable tray pathway.

Snake Nuts™ Threaded Rod Fastener

Part Number Part Size
CM 801-SN-38-A Fits 3/8"-16 Threaded Rod
CM 801-SN-12-A Fits ½"-13 Threaded Rod
CM 801-SN-58-A Fits 5/8"-11 Threaded Rod

This innovative fastener eliminates the labor burning need to hand thread hex nuts up a threaded rod. Simply insert the Snake Nut anywhere on the threaded rod and tighten into place with a set screw. Once locked into place, Snake Nut has been tested to hold up to 9000 pounds.

Snake Suspenders – Wire Rope Suspension Kit

This amazing proprietary system allows for the Mega Snake Series Cable Tray to be suspended via wire rope. The components attach directly to Mega Snake’s equipment mounting rail system. Once engaged, the Mega Snake height can be adjusted at will and without tools. It can be readjusted anytime during the installation process. Snake Suspenders add on gimbal kit can vector the wire rope in any direction for seismic cross bracing.

Part Number Part Size
CM 801-SSK-XX Snake Suspender Kit for Mega Snake
CM 801-SSK-GK Snake Suspender Gimbal Kit for Mega Snake

XX DENOTES LENGTH

Center Support

Bracket used when access to either side is required.

Part Number Part Size
CM 801-4-6-CS Center Support for 4" D x 6" W Tray
CM 801-2-18-CS Center Support for 2" D x 18" W Tray
CM 801-2-24-CS Center Support for 2" D x 24" W Tray
CM 801-4-18-CS Center Support for 4" D x 18" W Tray
CM 801-4-24-CS Center Support for 4" D x 24" W Tray
CM 801-6-18-CS Center Support for 6" D x 18" W Tray
CM 801-6-24-CS Center Support for 6" D x 24" W Tray

Note: 12" Mega Snake has built-in center support.

Wall Bracket

Part Number Part Size
CM 801-4-6-WB Wall Bracket for 4" D x 6" W Tray
CM 801-2-12-WB Wall Bracket for 2" D x 12" W Tray
CM 801-2-18-WB Wall Bracket for 2" D x 18" W Tray
CM 801-2-24-WB Wall Bracket for 2" D x 24" W Tray
CM 801-4-12-WB Wall Bracket for 4" D x 12" W Tray
CM 801-4-18-WB Wall Bracket for 4" D x 18" W Tray
CM 801-4-24-WB Wall Bracket for 4" D x 24" W Tray
CM 801-6-12-WB Wall Bracket for 6" D x 12" W Tray
CM 801-6-18-WB Wall Bracket for 6" D x 18" W Tray
CM 801-6-24-WB Wall Bracket for 6" D x 24" W Tray

Double Wall Bracket

Configurations to accommodate different trays on top and bottom available.

Part Number Part Size
CM 801-X-X-WB-D-OU Over/Under Wall Bracket

X DENOTES TRAY SIZE (DEPTH AND WIDTH)

Cabinet Bracket

Cabinet Basket used to mount 801 Series Mega Snake to the top of Data Cabinets.

Part Number Part Size
CM 801-X-X-CBN 3/5 Adjusts 3 - 5"
CM 801-X-X-CBN 6/10 Adjusts 6 - 10"
CM 801-X-X-CBN 9/15 Adjusts 9 - 15"
CM 801-X-X-CBN 12/18 Adjusts 12 - 18"

X DENOTES TRAY SIZE (DEPTH AND WIDTH) *CUSTOM CONFIGURATIONS AVAILABLE.

Cable Drop Out

Part Number Part Size
CM 801-TO-12 12" End Mounted Waterfall
CM 801-TO-18 18" End Mounted Waterfall
CM 801-TO-24 24" End Mounted Waterfall

Rail Mount Cable Drop Out

Part Number Part Size
CM 801-TO-SM Rail Mounted Waterfall

Rail mounted water fall designed to enter/exit cable over side rail on 801 Series Mega Snake.

Side Mount Cable Dropout

Part Number Part Size
CM 801-TO-3.50 Side Mounted Dropout 3.5" wide

Side mounted dropout designed to enter/exit cable through side rail on 801 Series Mega Snake.

In-Line Cable Dropout

Part Number Part Size
CM 801-TO-5 In-Line Cable Dropout for 12", 18" and 24" Trays

In-line dropout designed to enter/exit cable through a center section of 801 Series Mega Snake.

Tray Inserts and Covers

Part Number Part Size
CM 801-X-C Tray Cover in 6", 12", 18" and 24" widths
CM 801-X-X-TI Tray Insert in 6",12", 18" and 24" widths
CM 801-X-TI-FLAT Tray Flat Bottom Insert in 6", 12", 18" and 24" widths

In 60" lengths, two inserts per tray required.

Conduit Adapter

Part Number Part Size
CM 801-CP-2 2 Point Connection Conduit Bracket
CM 801-CP-10 10 Point Connection Conduit Bracket

*Additional CONFIGURATIONS AVAILABLE.

Patch Panel Adapter

19″ Patch Panel bracket attaches to side rail on 801 Series Mega Snake.

Part Number Part Size
CM 801-PP/19-1U 19" Patch Panel Bracket - 1U
CM 801-PP/19-2U 19" Patch Panel Bracket - 2U
CM 801-PP/19-3U 19" Patch Panel Bracket - 3U
CM 801-PP/19-4U 19" Patch Panel Bracket - 4U

CUSTOM SIZES AVAILABLE.

Fiber Optic Turnout Module

Part Number Part Size
CM 801-FOTO-S Fiber Optic Single Exit for Cables
CM 801-FOTO-D Fiber Optic Double Exit for Cables

Fiber optic exit designed to attach to the 801 Series Mega Snake. Designed to protect cable and control bend radius.

Power Distribution Module

The Power Distribution Module is the cornerstone of the Power Mega Snake power distribution system. It is available empty or loaded with customer specified NEMA receptacles. It is also available pre-wired with MC cables to be carried by the Mega Snake and terminated at the electrical panel.

Part Number Part Size
CM 801-PM-XX Customer Specified Power Distribution Module

XX DENOTES CUSTOMER SPECIFIED POWER REQUIREMENTS. Call the Snake tray engineering team to assist you with the power distribution configuration and part numbers.

Termination Kit

Part Number
CM 801-WTK

Mega Snake support for 90° wall, floor and ceiling terminations.

Floor Stanchion

Mega Snake floor mounted support system.

Part Number
CM 801-FST-XX

XX DENOTES HEIGHT.

Mega Snake® Air Separator

This auxiliary component attaches directly to the Mega Snake’s mounting rail to provide code compliant separation between high ampacity conductors. This separation system provides the spacing that will allow the full ampacity rating of cables in accordance with the NEC. Can be configured to the customer’s specific cable schedule.

Part Number Part Size
CM 801-AS-12-001 12" wide Mega Snake
CM 801-AS-18-001 18" wide Mega Snake
CM 801-AS-24-001 24" wide Mega Snake

Mega Snake Under Tray Pathway System

Unique applications require unique solutions. In hospital environments, there is a need for mission critical cable pathways apart from the standard data cabling infrastructure, typically nurse call, alarm and security cabling. This under tray add on accessory provides up to 8 separate color coded cable pathways, simple to install and available with customer specific color coding.

Part Number Part Size
CM 801-18-ACSM Auxiliary Conveyance System Module