Universal Tray Connector Bolt

Part Number
CB-10

Provides both a mechanical and a bonded electrical connection when joining tray sections to one another.

• One CB-10 required per connection.

Universal Inline Connector Bolt

Part Number
CB-12

Provides both a mechanical and bonded electrical connection when joining tray sections to one another.

• One CB-12 required per connection
• Set screws max torque = 230 in-lbs

Double Snake Tray Intersection

Part Number Part Size
CM 425D 12" x 12"
CM 5D 14" x 14"

Installed as either a TEE or 4-way crossing intersection component for the Double Snake 201 series tray.

Intersection/TEE for Double Snake Tray with Single Snake Cross

Part Number Part Size
CM 425D/425 7 ½" x 20"

Installed as either a TEE or 4-way crossing intersection component for a Double Snake and a Single Snake crossing.

WYE Connection

Part Number Part Size
CM 201-Y 5" x 6"

Used to create a WYE intersection or split Double Snake into two (2) separate cable paths at a terminal end.

201 to 501 Series Connection Adapter

Part Number Part Size
CM 201/501T 5 ¼" x 5 ¼"

Used to adapt 201 series to 501 series trays.

Universal TEE Intersection for 201, 401, 454 and 501 Series

Part Number Part Size
CM 0303T 5 ½" x 5 ½"

Installed as TEE component for the Snake 201, 401, 454 and 501 series trays.

Universal Intersection for 201, 401 and 454 Series

Part Number Part Size
CM 0303H 5 ½" x 5 ½"

Installed as 4-way crossing intersection component for the 201, 401 and 454 series trays.

Rack Mount Bracket for 201 Series

Part Number
RBN-201
RBN-201-90

Used to mount single pocket 201 series Snake Tray to the tops of standard equipment racks via a built-in clamping feature. No additional hardware required. RBN-201-90 mounts to the tray perpendicularly. Clamp to attach to tray included.

Rack Mount Bracket for 201 Series Double

Part Number
RBN-201 D

Used to mount double pocket 201 series Double Snake to the tops of standard racks via a built-in clamping feature. No additional hardware required.

Beam Clamp for 3/8″ Threaded Rod for 201 and 454 Series

Part Number
BC-201-A

Used to attach 3/8"-16 threaded rod to a beam.

Pedestal Mount Bracket for 201 Series

Part Number
ST-201

Used to attach single pocket 201 series tray to the floor pedestals utilized in the construction of raised access floors.

Pedestal Mount Bracket for 201 Series Double

Part Number
ST-201-D
ST-201-5D

Used to attach double pocket 201 series Double Snake to the floor pedestals utilized in the construction of raised access floors.

Wall Mount Bracket for 201 Series Single

Part Number
WBN-201

Used to attach single pocket 201 series tray to walls and other vertical surfaces. Clamp to attach to tray included.

Wall Mount Bracket for 201 Series Double

Part Number
WBN-201D
WBN-201-5D

Used to attach double pocket 201 series double tray to walls and other vertical surfaces. Clamp to attach to tray included.

Cabinet Mount Bracket for 201 Series Single

Part Number
CBN-201
CBN-201-90

Used to attach single pocket 201 series tray to the tops of equipment cabinets. Clamp to attach to tray included.

Cabinet Mount Bracket for 201 Series Double

Part Number
CBN-201D
CBN-2015D

Used to mount double pocket 201 series double tray to the tops of equipment cabinets. Clamp to attach to tray included.

Cable Drop-Out Waterfall for 201, 401 and 501 Series

Part Number Part Size
TO-2 2" W
TO-3 3" W
TO-425 4 ¼" W
TO-5 5" W
TO-6 6" W

Provides a smooth transition for cables when exiting the tray. Maintains a consistent 4" radius eliminating kinked cables. Easily attaches to tray with cable ties.

Threaded Rod

Part Number Part Size
TR-1 3/8" x 12" Threaded Rod
TR-2 3/8" x 24" Threaded Rod
TR-3 3/8" x 36" Threaded Rod
TR-4 3/8" x 48" Threaded Rod
TR-6 3/8" x 72" Threaded Rod
TR-8 3/8" x 96" Threaded Rod

Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8"-16 10/24 high strength steel as per ASTM A36 and available in 1', 2', 3', 4' 6', and 8' lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8" hex nuts and one flat washer. No additional mounting accessories are necessary.

Concrete Wedge Anchor

• Anchor diameter equals hole diameter
• Comes complete with nuts and washers ready for use
• Collar expander offers 360° contact with masonry
• Projections on collar immediately grip concrete

Part Number Part Size
CM-WA-.25X1.75-SS316 ¼" D x 1 ¾" L
CM-WA-12X7.00-SS304 ½" D x 7" L
CM-WA-12X7.00-SS316 ½" D x 7" L
CM-WA-25X1.50-SS316 ¼" D x 1 ½" L
CM-WA-38X3.75-SS316 3/8" D x 3 ¾" L
CM-WA-58X5.25-SS316 5/8" D x 5 ¼" L

Concrete Anchor

Part Number
CM CA-38

Used to anchor trays and components to concrete. (1/4" hole)

Hanger Bracket for Threaded Rod Suspension

Part Number
CM TR-HBS for Steel
CM TR-HBC for Concrete

Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm power actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.

Attachment Hardware

Part Number Description
CM-FW-38-ZI Zinc Plated 3/8" Washer
CM-HN-38-ZI Zinc Plated 3/8" Hex Nut
CM-RC-38-ZI Zinc Plated 3/8" Rod Coupling

Snake Nut™ Threaded Rod Fastener

Part Number Description
STSN 38 Fits 3/8"-16 Threaded Rod
STSN 12 Fits ½"-13 Threaded Rod
STSN 58 Fits 5/8"-11 Threaded Rod

This innovative fastener eliminates the labor intensive need to hand thread hex nuts up a threaded rod. Simply insert the Snake Nut anywhere on the threaded rod and tighten into place with a set screw. Once locked into place, Snake Nut has been tested to hold up to 6,800 pounds.