407 Series Solar Snake Tray

Solar Snake Charmer
This is the long-awaited solution for inspector’s request to get connectors and cables out of water and snow on rooftops. Snake Charmer snaps into place under the panel to carry connectors safely and securely at the rear of the panel. No tools required.
Part Number |
---|
CM 407-SC |

Universal Ballasted Roof Top Anchor
Snake Tray’s ballasted roof mount anchors use common cement block ballasts to support Solar Snake cable tray, carrying PV cables from solar arrays to combiner boxes and inverters. It is also available with a strut mount system as well as many custom brackets to attach virtually any roof top ballasted component. Padding on base protects roof membranes.
* PATIO BLOCKS NOT SUPPLIED
Part Number |
---|
CM 407-SF-1 |

Ballasted Roof Top Anchor
Snake Tray’s ballasted roof mount anchors use common cement block ballasts to support Solar Snake cable tray, carrying PV cables from solar arrays to combiner boxes and inverters. It is also available with a strut mount system as well as many custom brackets to attach virtually any roof top ballasted component. Padding on base protects roof membranes.
* PATIO BLOCKS NOT SUPPLIED
Part Number |
---|
CM 407-SF-4 |

Kindorf Mount
Snake Tray’s ballasted roof mount anchors use common cement block ballasts to support Solar Snake cable tray, carrying PV cables from solar arrays to combiner boxes and inverters. It is also available with a strut mount system as well as many custom brackets to attach virtually any roof top ballasted component. Padding on base protects roof membranes.
* PATIO BLOCKS NOT SUPPLIED
Part Number |
---|
CM 401-SF-1-RD |

Solar Snake Tray Covers for 90° Mounting
The 60-inch long covers give cabling an added layer of protection. Constructed of galvanized sheet steel. Air slots allow for ventilation.
Part Number | Description |
---|---|
CM 407-22-C-60 | Cover for 2” x 2” x 10’ Powder Coated Gray |
CM 407-33-C-60 | Cover for 3” x 3” x 10’ Powder Coated Gray |
CM 407-34-C-60 | Cover for 3” x 4” x 10’ Powder Coated Gray |
CM 407-22-C-60-SS | Cover for 2” x 2” x 10’ Stainless Steel |
CM 407-33-C-60-SS | Cover for 3” x 3” x 10’ Stainless Steel |
CM 407-34-C-60-SS | Cover for 3” x 4” x 10’ Stainless Steel |

Solar Snake Tray Covers for 180° Mounting
The 60-inch long covers give cabling an added layer of protection. Constructed of galvanized sheet steel. Air slots allow for ventilation.
Part Number | Description |
---|---|
CM 407-22-180-C-60 | Cover for 2” x 2” x 10’ Powder Coated Gray |
CM 407-33-180-C-60 | Cover for 3” x 3” x 10’ Powder Coated Gray |
CM 407-34-180-C-60 | Cover for 3” x 4” x 10’ Powder Coated Gray |
CM 407-22-180-C-60-SS | Cover for 2” x 2” x 10’ Stainless Steel |
CM 407-33-180-C-60-SS | Cover for 3” x 3” x 10’ Stainless Steel |
CM 407-34-180-C-60-SS | Cover for 3” x 4” x 10’ Stainless Steel |

Solar Snake Tray Covers for 180° Low Profile Mounting
The 60-inch long covers give cabling an added layer of protection. Constructed of galvanized sheet steel. Air slots allow for ventilation.
Part Number | Description |
---|---|
CM 407-41-180-C-60 | Cover for 4” x 1” x 10’ Powder Coated Gray |
CM 407-61-180-C-60 | Cover for 6” x 1” x 10’ Powder Coated Gray |
CM 407-81-180-C-60 | Cover for 8” x 1” x 10’ Powder Coated Gray |

CB-8
Tin plated grounding connector
Part Number | Part Size |
---|---|
CB-8 | Up to #2 AWG |

CB-12-SS
Stainless Steel Connector Bolt
Part Number |
---|
CB-12-SS |

Snake Hook
Snake hook for mounting to any type of purlin hook specifically designed to mount onto hand bendable Solar Snake Tray in seconds. Ideal for car parks and ground mount installations.
Part Number | Description |
---|---|
STSN 38 | Fits 3/8"-16 Threaded Rod |
STSN 12 | Fits ½"-13 Threaded Rod |
STSN 58 | Fits 5/8"-11 Threaded Rod |