Home »  Snake Box™ » Floor Enclosures

Floor Enclosures


Download Cut Sheet

Ultra Low Profile with Flip Door

 
Part Number Size
CM 708-05-0024 21 ¼" L x 21 ¼" W x 2 ½" D
Applications:
Designed for either overhead or under raised access floors. Low profile design maximizes all usable space. Internal design accepts two 1 RU connectivity solutions, or can be designed for specific customer requirements. The cover comes standard with a secure locking lid.
Features:
  • Room for two 24-port patch panels or any other two 1 RU 19" mounting solution
  • Secured cover
  • Built in wire management
  • Standard 2 ½" depth, can be customized
  • Eight edge protected openings for easy cable routing or can be built with standard knockouts
  • Constructed from 16 GA galvanized steel with customer specified powder coat finish available
  • Completely customizable internal mounting structures
   

 back to top
 
Download Cut Sheet

Ultra Low Profile

 
Part Number Size
CM 708-78-10876 11 ½" L x 7 ½" W x 1 5/8" D
Applications:
The Ultra Thin floor box designed for extremely low profile floors incorporates both electrical and data into a 1 ½" deep shallow profile design. This design will work in all low profile raised floor applications. The unique completely flush mount split cover is an industry first! UL Listed and approved, this box will meet with all local codes and standards. Enclosure can be customized to meet customer’s specifications.
Features:
  • Ultra slim design only occupies 1 ½” of height in an access floor
  • Built-in data and power receptacles
  • Customizable to meet a customer’s specifications
  • Flush mount design (eliminates tripping hazards)
  • Split hinged door
  • UL Listed
   

 back to top
 

Med Profile Floor Box

 
Part Number Size
CM 708-FB-XX 13" L x 9" W x 2.5" D
Features:
  • Designed to customer requirements for flexibility and durability
  • Two separate compartments, one on each side of the unit
  • Either or both can be used for power or data
  • Multiple AV, and Data configurations are available
  • Constructed from 16 GA galvanized steel
  • Powder coated steel cover with 2-cable access points with recessed lid
  • Designed to work with the 707 Series Snake Bus Power Distribution System
SNAKE TRAY CAN CUSTOM CONFIGURE YOUR MODULES TO FIT OUR SPECIFIC REQUIREMENTS
   

 back to top
 

Snake Bus Recessed Floor Box with 3 Independent Protected Circuits

 
Part Number Size
CM 707-20-A-25-04-20-3-005-0018 13" L x 9" W x 5 ½" D
Features:
  • Designed to customer requirements with up to 3 independent circuits and 12 keystone receptacles for data
  • Designed to work in conjunction with 707 Series Snake Bus Power Distribution
  • Two separate compartments for data and power
  • Steel cover with 2-cable access points and recessed lid will accept carpet
SNAKE TRAY CAN CUSTOM CONFIGURE YOUR MODULES TO FIT OUR SPECIFIC REQUIREMENTS
   

 back to top
 

Fiber Optic Breakout System with Copper Channels for Access Floors

 
Part Number Size
CM 708-DC-78-10711 9 1/8" OD x 5 5/16" D
Applications:
This cylindrical raised floor distribution station is designed to customer’s specific requirements for a complete pre-configured plug-n-play network terminal for copper and fiber. Inbound 12 strand MPO breaks into 6 channels to SC/LC duplex connectors as well as four category 6/6A channels.
Features:
  • Designed in conjunction with architectural firms, this cylindrical module incorporates both fiber and copper telecommunication interfaces in a single compact design specifically for raised floor installations
  • Modular telecommunications cabling system shall ensure efficient voice and data signal transmission with true plug-and-play modularity
  • The keyed circular 16 GA galvanized steel cover will match typical in-floor air diffusers for architectural symmetry
  • The body of the module is constructed from 16 GA aluminum
   

 back to top
 

Hybrid Power/Data Enclosure for Access Floors- Part of 707 Series

 
Part Number Size
CM 708-DC-78-10816 9 1/8" OD x 5 9/16" D
Applications:
This economical and convenient power/data module is designed to fit seamlessly with most commercially available air diffusers. Used in raised floor applications,it provides both power and data connections in a single compact module.
Features:
  • Round design allows for the module to be installed in the same size opening as standard air diffusers.
  • Eliminates the need for multiple custom sized cutouts in the raised floor tiles
  • Two compartment aluminum construction with steel dividers to accommodate both power and/or data connections
  • Accommodates all telecommunication options
  • Isolated circuits with built-in circuit protection for both isolated and general purpose applications
  • Standard high performance steel cover lid with recessed lid for carpet or tile installation
  • Fits into holes ranging from 8" to 8 ½" diameter
  • Available with multiple ports on side and/or bottom
  • Fully compatible with 707 Series Snake Bus
   

 back to top
 

Zone Distribution Box - High Density Fiber

 
Part Number Size
CM 708-1100-05-01 21" L x 21" W x 8" D
Applications:
The in floor Fiber Cassette enclosure is an ideal zone cabling solution serving as a consolidation point or zone distribution area.The in-floor enclosure saves valuable real estate by providing a secure solution under the floor which relieves congestion on racks and cabinets for installing network equipment. The enclosure can be used along with up to 14 preterminated fiber cassettes as a ZDA for instant data center installations and reconfigurations.The innovative lift-out tray design allows for easy cable configurations, minimizes cable pinching and will maintain proper bend radius for cable.Comes complete with mounting hardware for all raised floor designs or simple ground mount installation.
Features:
  • Lockable secure lid design
  • Fold out platform allows for accessibility to 14 channel fiber optic cassettes
  • 14 MPO – Input/output 84 channels of SC Duplexes
  • Multiple knockout configurations available,edge protected cable access points
  • Simplified design reduces network downtime and labor costs associated with MAC work
  • Constructed from 16 GA galvanized steel with customer specified powder coat finish available
  • Multiple sizes available
   

 back to top
 

Zone Distribution Box II - Under Floor use for Fiber & Copper

 
Part Number Size
CM 708-78-10720-2.50 22" L x 15 ½" W x 8 ½" D
Applications:
Fully assembled large capacity, secure enclosure that works within the confines of office raised floor tiles. Includes a variety of customer dictated working options that will accommodate up to 6 RU of standard 19" rack mountable field terminated or pre-terminated connectivity solutions.
Features:
  • Unique angled support allows for 2 more RU spaces than competitors with the same volume and footprint
  • Built-in internal cable manager
  • Secure locking hinged cover that allows for unimpeded working space
  • Constructed from 16 GA galvanized steel with customer specified powder coat finish available
  • Available with standard knockouts or customer specified locations
  • Accepts a variety of connectivity solutions
   

 back to top
 

Low Profile Data Module with Custom Patch Panel

 
Part Number Size
CM 708-SK-0216 16" L x 15 ½" W x 4 ¾" D
Applications:
Fully assembled low profile, secure enclosure that works within the confines of office raised floor tiles. Includes a variety of customer dictated working options that will accommodate up to 4 RU of standard 19" rack mountable field terminated or pre-terminated connectivity solutions.
Features:
  • Built-in internal cable manager
  • Secure locking hinged cover that allows for unimpeded working space
  • Constructed from 16 GA galvanized steel with customer specified powder coat finish available
  • Available with standard knockouts or customer specified locations
  • Accepts a variety of connectivity solutions
  • Multiple 2 and 4 RU custom connectivity mounting plates are available
   

 back to top
 

Under Floor Data Distribution System

 
Part Number Size
CM 708-SK-0189 20" L x 20" W x 13 ½" D
Features:
  • Designed to a customer's specific requirements to accommodate the need for specialized fire code requirements
  • Designed to be used with Series 652 Snake Way Secured Pathway
  • 8 RU of 19" rack mountable space
  • Removable locking cover
  • Constructed from 16 GA galvanized steel with customer specified powder coat finish available
  • Custom knockout configurations
   

 back to top
 

Fiber and Copper SCIF Secured Module

 
Part Number Size
CM 708-SK-0148 21" L x 14" W x 6" D
Applications:
This secure box is designed to house sensitive connections under raised floors. Primarily used in SCIF and other secure venues, this box has a sliding removable cover with integrated padlock hasp. The unique design makes it impossible for entrance unless physically unlocked, keeping out all unwanted personnel. All seams are electronically welded for a completely enclosed and secure module..
Features:
  • Lockable secure lid design with pad lock hasp
  • Constructed from 16 GA galvanized steel with customer specified powder coat finish available
  • Completely welded seams
  • Available with or without knockouts
  • Complete with built-in cable management and fiber cassette mounting structure
  • 110 block mounting positions
  • Custom configurations are available
   

 back to top