Home »  Mega Snake® » 801 Series Mega Snake Accessories

801 Series Mega Snake Accessories


Size Adapters

 
Part Number Description
CM 801-2-R6 2" x 12" to 2" x 18" or 2" x 12" to 2" x 24"
CM 801-2-R12 2" x 12" to 2" x 24"
CM 801-4-R6 4" x 12" to 4" x 18" or 4" x 18" to 4" x 24"
CM 801-4-R12 4" x 12" to 4" x 24"
CM 801-6-R6 6" x 12" to 6" x 18" or 6" x 18" to 6" x 24"
CM 801-6-R12 6" x 12' to 6" x 24"
CM 801-2/4-R6 2" x 12" to 4" x 18" or 2" x 18" to 4" x 24"
CM 801-2/4-R12 2" x 12" to 4" x 24"
CM 801-4/6-R6 4" x 12" to 6" x 18" or 4" x 18" to 6" x 24"
CM 801-4/6-R12 4" x 12" to 6" x 24"
CM 801-2/6-R6 2" x 12" to 6" x 18" or 2" x 18" to 6" x 24"
CM 801-2/6-R12 2" x 12" to 6" x 24"
Transition from one size Mega Snake to another.
 
   

 back to top
 
View Product Video on

Download Cut Sheet

Splice Kit

 
Part Number Description
CM -801-SP Mega Snake Splice Kit (2 splice plates per kit)
Splice kit maintains a continual ground throughout the Mega Snake system.
 
   

 back to top
 
View Product Video on

Snake Nuts™ Threaded Rod Fastener

 
Part Number Description
CM 801-SN-38-A Fits 3/8"-16 Threaded Rod
CM 801-SN-12-A Fits ½"-13 Threaded Rod
CM 801-SN-58-A Fits 5/8"-11 Threaded Rod
This innovative fastener eliminates the labor burning need to hand thread hex nuts up a threaded rod. Simply insert the Snake Nut anywhere on the threaded rod and tighten into place with a set screw. Once locked into place, Snake Nut has been tested to hold up to 9000 pounds.
 
   

 back to top
 

Divider Grid

 
Part Number Description
CM 801-2-DG Mega Snake 2" D Divider Grid x 60"
CM 801-4-DG Mega Snake 4" D Divider Grid x 60"
CM 801-6-DG Mega Snake 6" D Divider Grid x 60"
Divides cable tray pathway.
 
   

 back to top
 

Center Support

 
Bracket used when access to either side is required.
Part Number Description
CM 801-4-6-CS Center Support for 4" D x 6" W Mega Snake
CM 801-2-18-CS Center Support for 2" D x 18" W Mega Snake
CM 801-2-24-CS Center Support for 2" D x 24" W Mega Snake
CM 801-4-18-CS Center Support for 4" D x 18" W Mega Snake
CM 801-4-24-CS Center Support for 4" D x 24" W Mega Snake
CM 801-6-18-CS Center Support for 6" D x 18" W Mega Snake
CM 801-6-24-CS Center Support for 6" D x 24" W Mega Snake
Note: 12" mega Snake has built-in center support.
 
   

 back to top
 

Wall Bracket

 
Part Number Size
CM 801-4-6-WB Wall Bracket for 4" D x 6" W Tray
CM 801-2-12-WB Wall Bracket for 2" D x 12" W Tray
CM 801-2-18-WB Wall Bracket for 2" D x 18" W Tray
CM 801-2-24-WB Wall Bracket for 2" D x 24" W Tray
CM 801-4-12-WB Wall Bracket for 4" D x 12" W Tray
CM 801-4-18-WB Wall Bracket for 4" D x 18" W Tray
CM 801-4-24-WB Wall Bracket for 4" D x 24" W Tray
CM 801-6-12-WB Wall Bracket for 6" D x 12" W Tray
CM 801-6-18-WB Wall Bracket for 6" D x 18" W Tray
CM 801-6-24-WB Wall Bracket for 6" D x 24" W Tray
 
   

 back to top
 

Cabinet Bracket

 
Part Number Size
CM 801-X-X-CBN X Denotes Tray Size (Depth x Width)
Cabinet Basket used to mount 801 Series Mega Snake to the top of Data Cabinets. Available in various heights.
 
   

 back to top
 

Cable Drop Out

 
Part Number Description
CM 801-TO-12 12" End Mounted Waterfall
CM 801-TO-18 18" End Mounted Waterfall
CM 801-TO-24 24" End Mounted Waterfall
 
   

 back to top
 

Rail Mount Cable Drop Out

 
Part Number Description
CM 801-TO-SM Rail Mounted Waterfall
Rail mounted water fall designed to enter/exit cable over side rail on 801 Series Mega Snake.
 
   

 back to top
 

Side Mount Cable Drop Out

 
Part Number Description
CM 801-TO-3.50 Side Mounted Waterfall 3.5" wide
Side mounted water fall designed to enter/exit cable through side rail on 801 Series Mega Snake.
 
   

 back to top
 

Tray Inserts and Covers

 
Part Number Description
CM 801-X-C Tray Cover in 12", 18" and 24" widths
CM 801-X-X-TI Tray Insert in 12", 18" and 24" widths
 
   

 back to top
 

Conduit Adapter

 
Part Number Description
CM 801-CP-2 2 Point Connection Conduit Bracket
CM 801-CP-10 10 Point Connection Conduit Bracket
*ADDITIONAL CONFIGURATIONS AVAILABLE.
 
   

 back to top
 

Patch Panel Adapter

 
Part Number Description
CM 801-PP/19 19" Patch Panel Bracket (Other sizes available)
19" Patch Panel bracket attaches to side rail on 801 Series Mega Snake. Available in 1U and 2U sizes.
 
   

 back to top
 

Fiber Optic Turnout Module

 
Part Number Description
CM 801-FOTO-S Fiber Optic Single Exit for Cables
CM 801-FOTO-D Fiber Optic Double Exit for Cables
Fiber optic exit designed to attach to the 801 Series Mega Snake. Designed to protect cable and control bend radius.
 
   

 back to top
 

Power Distribution Module

 
Part Number Description
CM 801-PM-XX Customer Specified Power Distribution Module
The Power Distribution Module is the cornerstone of the Power Mega Snake power distribution system.  It is available empty, or loaded with customer specified NEMA receptacles.  It is also available pre-wired with MC cables to be carried by the Mega Snake and terminated at the electrical panel.
XX DENOTES CUSTOMER SPECIFIED POWER REQUIREMENTS.
Call the Snake tray engineering team to assist you with the power distribution configuration and part numbers.
 
   

 back to top
 

Full Height Floor Supports for Mega Snake

 
Part Number
CM 801-FST-X
This support allows Mega Snake Tray free standing support system that installs independently of cabinets and rack.
X DENOTES HEIGHT.
 
   

 back to top
 

Termination Kit

 
Part Number
CM 801-WTK
Mega Snake support for 90° wall terminations.
 
   

 back to top
 

Floor Stanchion

 
Part Number
CM 801-FST-XX
Mega Snake floor mounted support system.
XX DENOTES HEIGHT.
 
   

 back to top
 

Mega Snake® Air Separator

 
Part Number Description
CM 801-AS-12-001 12" wide Mega Snake
CM 801-AS-12-001 12" wide Mega Snake
This auxiliary component attaches directly to the Mega Snake's mounting rail to provide code compliant separation between high impacity conductors. Can be configured to the customer's specific cable schedule.
 
   

 back to top
 

Mega Snake Under Tray Pathway System

 
Part Number Description
CM 801-18-ACSM Auxiliary Conveyance System Module
Unique applications require unique solutions. In hospital environments, there is a need for mission critical cable pathways apart from the standard data cabling infrastructure, typically nurse call, alarm and security cabling. This under tray add on accessory provides up to 8 separate color coded cable pathways, simple to install and available with customer specific color coding.
 
   

 back to top
 

Hinged Splice Plates

 
Part Number Description
CM 801-4-6-H-SP 4" D x 6" Hinged Splice Plate Kit
CM 801-2-12-H-SP 2" D x 12" Hinged Splice Plate Kit
CM 801-4-12-H-SP 4" D x 12" Hinged Splice Plate Kit
CM 801-6-12-H-SP 6" D x 12" Hinged Splice Plate Kit
CM 801-2-18-H-SP 2" D x 18" Hinged Splice Plate Kit
CM 801-4-18-H-SP 4" D x 18" Hinged Splice Plate Kit
CM 801-6-18-H-SP 6" D x 18" Hinged Splice Plate Kit
CM 801-2-24-H-SP 2" D x 24" Hinged Splice Plate Kit
CM 801-4-24-H-SP 4" D x 24" Hinged Splice Plate Kit
CM 801-6-24-H-SP 6" D x 24" Hinged Splice Plate Kit
 
   

 back to top
 

Double Wall Bracket

 
Part Number Description
CM 801-2-12-WB-D-OU Over/Under Wall Bracket for 2" x 12" Tray
CM 801-4-12-WB-D-OU Over/Under Wall Bracket for 4" x 12" Tray
CM 801-6-12-WB-D-OU Over/Under Wall Bracket for 6" x 12" Tray
 
   

 back to top
 

In-Line Cable Dropout

 
Part Number Description
CM 801-TO-5 In-Line Cable Dropout for 12”, 18” and 24” Trays
 
In-Line dropout designed to enter/exit cable through a center section of 801 Series Mega Snake.
   

 back to top