 |
|
|||||||||||||
Hardware |
Threaded Rod
| Part Number | Size |  |
|---|---|---|
| TR-1 | 3/8" x 12" THREADED ROD | |
| TR-2 | 3/8" x 24" THREADED ROD | |
| TR-3 | 3/8" x 36" THREADED ROD | |
| TR-4 | 3/8" x 48" THREADED ROD | |
| TR-6 | 3/8" x 72" THREADED ROD | |
| TR-8 | 3/8" x 96" THREADED ROD | |
 |
||
| Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8" 10/24 high strength steel as per ASTM A36 and available in 1’, 2’, 3’, 4’ 6’ and 8’ lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8" hex nuts and one flat washer. No additional mounting accessories are necessary. | ||
Concrete Anchor for 501 Series Wall SnakeTM
| Part Number |  |
|---|---|
| CM-501-CA | |
| Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Special design prevents the anchors from spinning in the hole. Anchor won't drop out while setting overhead. | |
Concrete Anchor
| Part Number |  |
|---|---|
| CM-CA-38 | |
| Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. | |
Hanger Bracket for Threaded Rod Suspension
| Part Number |  |
|---|---|
| CM-TR-HBS For Steel | |
| CM-TR-HBC For Concrete | |
| Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8mm powder actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension. | |
Attachment Hardware
| Part Number | Size |  |
|---|---|---|
| CM-FW-38 |
ZINC PLATED 3/8" WASHER | |
| CM-HN-38 | ZINC PLATED 3/8" HEX NUT | |
| CM-RC-38 | ZINC PLATED 3/8" ROD COUPLING | |
 |
 |
 |
 |
||||||||||||||||||||||||||||||||||||
|
 |
|
|
|
|
|
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
||
|
Snake Tray’s patented high-performance products have been installed in hundreds of progressive IT, data center, and production facilities by many leading corporations, institutions, and government agencies. |
||
|
||
|
 |